Fin Tube Products, Inc.

"L" Foot or Shoulder tension construction assures uniform fin spacing, rigidly interlocked by the fin radius overlap over the exposed shoulder edge. This prevents separation and movement under cycling conditions within the 450°F range.

Fin Tube Products, Inc. provides coils, "U" bends and serpentine shapes for your custom heat exchanger designs. Fin Tube Products, Inc. can assist your engineering department in both prototype and production runs. Depending on the bend radius finned tubing can be formed directly over a mandrel...

Stamped fins can be manufactured in almost any shape or size. This style of fin is commonly referred to as "Square Fin" or "Plate Fin". Although any shape is possible, square and round are the norm. The fin is attached to the tube in our Controlled Atmospheric Brazing Furnace with our FINBRAZE®...

Fin Tube Products, Inc. offers a root soldered fin to tube attachment. This method of soldering, available on our larger diameter tubing provides a void free fin to tube joint. This method of attachment decreases the amount of solder used compared to a dip process. This increases the heat transfer...

Fin Tube Products, Inc. is a leader in the development and production of miniature finned tubing. Finned tubing can be supplied in sizes descending from 1/4" to a diameter as small as .015". Fin counts can reach up to 142 fins per inch on the hypodermic size tubing. Fins are helically wound and...

Fin Tube Products, Inc. offers Edge-Tension fin tubes that are available in similar or dissimilar metals. Edge Tension finned tubing is recommended for moderate duty in normal ambient air applications and for low-temperature (up to 250°F) air cooled heat exchangers.

The brazed finned tubing service from Fin Tube Products, Inc. creates a metallurgical bond between the tube and fin, making it the most suitable bond for higher temperature applications. FINBRAZE® bonding between the tube and the fin ensures a stress-free, uniform, and non-porous contact. This...